Secondary cone crusher Crushing Stone Cone Crusher manufacturers Type Symons 4.25FT, Secondary Gravel Crusher Cone 236 TPH granite,Concrete Crushing Equipment Type Symons 4.25FT
Product Description
Symons Cone Crusher is suitable for processing gravels, ores, slag and construction waste and used for second, three or four level crushing of stones and slag.
Application
Symons cone crusher are widely applied in metallurgy, construction, road building, chemical and phosphatic industry. It is suitable for hard and mid-hard rocks and ores, such as iron ores, copper ores, limestone, quartz, granite, grit stone, etc... Cavity type of the crushing is decided by the application of the ores. Standard type is applicable to medium crushing, middle type is applicable to fine crushing and short-head type is applicable to super fine crushing.
Working Principle
1. When the Mine barite Symons cone crusher is working, the engine rotates around a fixed point driven by the belt wheel or the coupling.
2. The transmission shaft and the conical part of cone crusher swing under the force from the eccentric bushing, which makes the crushing wall of the Symons cone crusher close to the pierced mortar wall at intervals.
3. Then, the ores will be impacted, squeezed and bent constantly in the crushing chamber.
4. At last, the whole ore crushing process is finished.
5. The perfect combination of high-performance crushing chamber and high crushing frequency improves the handling ability of cone crusher to a greater degree.
1. Unequaled output and uniform product throughout a wide range of capacities;
2. High working efficiency, greater crushing force;
3. Largest head displacement provides greater production capacity;
4. Long lasting bearing with stand crushing loads and severe environmental conditions;
5. Hydraulic controls providing fast setting changes and simply clearing;
6. Long working life, low operating and maintenance costs;
7. All parts can be exchanged with Original Symons cone crusher. 
Working Principle
Symons cone crusher mainly consists of frame part, transmission part eccentric Ministry, the Ministry of bowl bearings, bearing sleeve Ministry Ministry of adjustment sleeve, the spring part and provide lubricant lubrication oil station and other components.
Symons cone crusher reasonable structural design, high production efficiency.
Using the design of high precision bowl bearing reserves and centralized lubrication systems and novel stem oil seals dust control system. When you need to adjust the discharge opening size can be adjusted by hand to promote the winch. The machine also has a thing when it is not broken into the crushing chamber, spring safety devices to protect equipment from damage characteristics.
When cone crusher work, motor drives the eccentric through the pulley, drive shaft and a rotating set of gears, crushing cone axis moving in force under the spin pendulum movement to do so crushing wall of rolling acetabular wall sometimes close, sometimes far away, ore crushing cavity constantly being squeezed and bent and broken.
Features
Symons cone crusher features :
1. Cubic-shaped end products;
2. Adjustable end products sizes, simple crushing process;
3. The board hammer is made of high chrome, abrasion-resistant, and with powerful impacting force;
4. Non-key connected, easy to maintain, cost-saving;
5. Sound construction and high efficiency.
Specification
Symons cone crusher technology specfications:
| Type | Model | Cavity Type | Diameter of cone (mm) | Adjusting Range of Discharge
Opening (mm) | Recommend feeding size when the minimum output size (mm) | Max feed
size (mm) | Capacity (t/h) | Main
Motor
Power (kw) | Weight (kg) | Overall
Dimension
(L×W×H) (mm) |
| 2’FT | PSGB- 0607 | Standard fine | 600 | 6-38 | 70 | 60 | 16-50 | 22 | 4500 | 2195×1158×1651 |
| PSGB- 0609 | Standard medium | 10-38 | 95 | 80 | 18-65 |
| PSGB- 0611 | Standard coarse | 13-38 | 110 | 90 | 22-70 |
| PSGD- 0603 | Short head fine | 3-13 | 35 | 30 | 9-35 |
| PSGD- 0605 | Short head coarse | 5-16 | 50 | 40 | 22-70 |
| 3’FT | PSGB- 0910 | Standard fine | 900 | 9-22 | 102 | 85 | 45-91 | 75 | 9980 | 2656×1636×2241 |
| PSGB- 0917 | Standard coarse | 13-38 | 175 | 150 | 59-163 |
| PSGB- 0918 | Standard super coarse | 25-38 | 178 | 150 | 118-163 |
| PSGD-0904 | Short head fine | 3-13 | 41 | 35 | 27-90 | 10530 |
| PSGD-0906 | Short head medium | 3-16 | 76 | 65 | 27-100 |
| PSGD-0907 | Short head coarse | 6-19 | 102 | 85 | 59-129 |
| 4.25’FT | PSGB- 1313 | Standard fine | 1295 | 13-31 | 137 | 115 | 109-181 | 160 | 22460 | 2983×1866×3156 |
| PSGB- 1321 | Standard medium | 16-38 | 210 | 178 | 132-253 |
| PSGB- 1324 | Standard coarse | 19-51 | 241 | 205 | 172-349 |
| PSGB- 1325 | Standard super coarse | 25-51 | 259 | 220 | 236-358 |
| PSGD-1306 | Short head fine | 3-16 | 64 | 54 | 36-163 | 22590 |
| PSGD-1308 | Short head medium | 6-16 | 89 | 76 | 82-163 |
| PSGD-1310 | Short head coarse | 8-25 | 105 | 89 | 109-227 |
| PSGD-1313 | Short head super coarse | 16-25 | 133 | 113 | 209-236 |
| 5.5’FT | PSGB- 1620 | Standard fine | 1676 | 16-38 | 209 | 178 | 181-327 | 220 | 43270 | 3941×2954×3771 |
| PSGB- 1624 | Standard medium | 22-51 | 241 | 205 | 258-417 |
| PSGB- 1626 | Standard coarse | 25-64 | 269 | 228 | 299-635 |
| PSGB- 1636 | Standard super coarse | 38-64 | 368 | 313 | 431-630 |
| PSGD-1607 | Short head fine | 5-13 | 70 | 60 | 90-209 | 43870 |
| PSGD-1608 | Short head medium | 6-19 | 89 | 76 | 136-281 |
| PSGD-1613 | short head coarse | 10-25 | 133 | 113 | 190-336 |
| PSGD-1614 | Short head super coarse | 13-25 | 133 | 113 | 253-336 |
| 7’FT | PSGB- 2127 | Standard fine | 2134 | 19-38 | 278 | 236 | 544-1034 | 400 | 86730 | 4613×3302×4638 |
| PSGB- 2133 | Standard medium | 25-51 | 334 | 284 | 862-1424 |
| PSGB- 2136 | Standard coarse | 31-64 | 369 | 314 | 1125-1814 |
| PSGB- 2146 | Standard super coarse | 38-64 | 460 | 391 | 1252-1941 |
| PSGD-2110 | Short head fine | 5-16 | 105 | 89 | 218-463 | 89500 |
| PSGD-2113 | Short head medium | 10-19 | 133 | 113 | 404-580 |
| PSGD-2117 | Short head coarse | 13-25 | 178 | 151 | 517-680 |
| PSGD-2120 | Short head super coarse | 16-25 | 203 | 172 | 580-744 |
Questions & Answers
1. How long is the delivery time of your product?
The delivery time is within 20 working days.
2. What is the payment term?
The payment term is T/T.
3.How long is the product warranty period?
Our warranty period is 1 year, excluding wearing parts.
4.What's the after sale service of your company?
We will provide foundation drawing to the clients for installation. Besides, we can provide guidance service for installation and operation of workers, etc.
5. Can your company provide wearing parts?
We can deliver you the spare parts within 10 working days after your order. If your equipment are not manufactured by our company, please provide us the wearing parts drawing or number.
Product Tags:
|
|
Secondary Gravel Crusher Cone 236 TPH granite,Concrete Crushing Equipment Type Symons 4.25FT Images
|
